Ferricpyrophosphate

SUBSTANCE/MIXTURE AND COMPANY IDENTIFICATION

Product Code
MB-F6553
Product Name
Ferric Pyrophosphate
Product Typology
Dehydrated substance for microbiology or botany

Company : ADVANCE IN ORGNICS
B-6 SECTOR-1 NOIDA G B NAGAR
Telephone : 0120-4277709
Fax : 0120-4277709
E-mail : – advanceinorganics@gmail.

HAZARDS IDENTIFICATION

GHS Classification of the substance or mixture
Any hazardous substance or mixture according to GHS (Globally Harmonized System) does not apply.

GHS Label elements
Pictogram : none
Signal word: none
Hazard statement(s): none
Precautionary statement(s): none
Supplemental Hazard Statement(s): none

Other hazards
The product isn’t classifiable as dangerous preparation.

COMPOSITION INFORMATION ON INGREDIENTS

 

Name

CAS No.

EC No.

Classification

Content

Ferric Pyrophosphate

10058-44-3

100%

GHS Classification of the substance or mixture
Any hazardous substance or mixture according to GHS (Globally Harmonized System) does not apply.

GHS Label elements
Pictogram : none
Signal word: none
Hazard statement(s): none
Precautionary statement(s): none
Supplemental Hazard Statement(s): none

Other hazards
The product isn’t classifiable as dangerous preparation.

4. FIRST AID MEASURES

General advice

Consult a physician. Show this safety data sheet to the doctor in attendance.

If inhaled

If breathed in, move person into fresh air. If not breathing, give artificial respiration.

If In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
No data available.
Indication of any immediate medical attention and special treatment needed
No data available.
5. FIREFIGHTING MEASURES
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
No data available.
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
7. HANDLING AND STORAGE
Precautions for safe handling
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Hygroscopic moisture sensitive.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Management factor

Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
9. EXPOSURE CONTROLS/PERSONAL PROTECTION
Physical form
Powder.
Color
No data available.
Odour
No data available.
Ph
No data available.
Melting point/freezing point
No data available.
Initial boiling point and boiling range
No data available.
Flash point
No data available.
Evaporation rate
No data available
Flammability (solid, gas)
No data available.
Vapour density
No data available.
Water solubility
No data available.
10. STABILITY AND REACTIVITY
Chemical stability
No data available.
Possibility of hazardous reactions
No data available.
Conditions to avoid
No data available.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In case of fire hazardous decomposition products are generated. – Carbon dioxide, nitrogen oxides, sulfur oxides, hydrogen chloride gas, sodium oxide, iron Oxides. Other decomposition products – no data available.
11. TOXICOLOGICAL INFORMATION

Potential health effects

Inhalation : May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion : May be harmful if swallowed.
Skin : May be harmful if absorbed through skin. May cause skin irritation.
Eyes : May cause eye irritation

Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC : No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity – single exposure
No data available
Specific target organ toxicity – repeated exposure
No data available
Aspiration hazard
No data available
12. ECOLOGICAL INFORMATION
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
No data available
13. DISPOSAL CONSIDERATIONS
Methods of disposal
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
14. TRANSPORT INFORMATION
No data available.
15. REGULATORY INFORMATION
Occupational Health and Safety Act
Hazardous substances subject to authorization – Korea – Not relevant.
Manufacturing, including the prohibition of hazardous substances – Not relevant
Toxic Chemicals Control Act
Toxic (Toxic Chemicals Control Act Article 19) – Not relevant.
Observed material (Toxic Chemicals Control Act Article 31) – Not relevant.
Restricted Toxic (Toxic Chemicals Control Act Article 32 & 33) – Not relevant.
Prohibited substances (Toxic Chemicals Control Act Article 32 & 33) – Not relevant
Safety Control of Dangerous Substances Act
Not relevant.
Wastes Control Act
Surveyed chemical emissions – Not relevant.
16. OTHER INFORMATION

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as
a guide. The information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the
product Advance In Organics and its Affiliates shall not be held liable for any damage resulting from handling or
from contact with the above product.

First publication: 01.12.2003
Revision number: rev. 0.1

Scroll to Top